BluePrint Engines BPC4085CTCD - 408 CID Chrysler Small Block Compatible Dressed Longblock w/ Carb - 465HP

Horsepower 465HP Torque 494FT/LBS Compression Ratio 10.0 to 1 Block 360 Magnum, 2 bolt main Pistons Forged Rotating Assembly Steel Crank - 4.00 in. Stroke and Forged 6.123 in. Rods Heads BluePrint Engines Aluminum Cylinder Heads Camshaft Specs Hyd Roller, .544 Int / .541 Exh and 236 Int / 242 Exh dur @ .050 - 110 LSA Experience impressive power with this performance-built engine, generating 465 horsepower and 494 ft. lbs. of torque. Built around a hand-picked, seasoned Magnum block, this engine undergoes precision machining, including square and parallel decking, align honing, and computer-controlled cylinder honing to within .0002" straightness and roundness. Cylinders are also sonic tested for thickness. The rotating assembly features a cast crankshaft (4.000" stroke), forged Magnum 6.123" connecting rods with 150,000 PSI bolts, and forged pistons, externally balanced. BluePrint Engines assembled and machined Edelbrock 61769 casting aluminum Magnum pattern cylinder heads optimize airflow with 58cc chambers, aluminum roller rockers, 2.02" intake/1.60" exhaust valves, and 176cc/75cc runners. A roller cam (.544"/.541" lift, 236/242 duration @.050-110 LSA) provides a broad powerband. This engine now comes with an expanded list of included components, making installation even easier. Key Features: • 465 Horsepower / 494 ft. lbs. Torque • 10:1 Compression Ratio • Hand-Picked Seasoned Magnum Block • Cast Crankshaft (4.000" Stroke) • Forged Magnum 6.123" Connecting Rods (150,000 PSI Bolts) • Forged Pistons • BluePrint Engines Assembled and Machined Edelbrock 61769 Casting Aluminum Magnum Pattern Cylinder Heads (58cc Chamber, Aluminum Roller Rockers, 2.02"/1.60" Valves, 176cc/75cc Runners) • Roller Cam (.544"/.541" Lift, 236/242 Duration @.050-110 LSA) • Expanded Included Components: • Valve Covers • Oil Pan • Timing Cover • Spark Plugs and Wires • Distributor • Water Neck • Thermostat and Thermostat Housing • Fuel Pump and Fuel Line • Harmonic Balancer • Air Cleaner • Drive Side Inlet Water Pump Important Notes: • If installing with a Manual Transmission with a .750" input shaft, the recommended pilot bearing is PN FC-69907. • Recommended Pilot OD is 1.81".